Why Concrete Cracks Even After Curing?
1. Plastic Shrinkage
When surface water evaporates faster than bleed water → surface pulls apart → hairline cracks appear.
2. Temperature Stress
Hot days + cold nights cause expansion & contraction. Surface cools faster → cracks form due to thermal difference.
3. Wrong Mix Ratio
Too much water reduces strength & causes drying shrinkage. Keep w/c ratio between 0.4–0.5 for durability.
4. Improper Joint Spacing
Large slabs need control joints every 4–5 m. Without them, cracks follow their own path.
5. Insufficient Curing Duration
Curing for only 2–3 days is not enough. Minimum 7 days (OPC) or 10–14 days (PPC) ensures proper hydration.
7 days OPC / 10–14 days PPC] R2[Use curing compounds or wet coverings] R3[Maintain w/c 0.4–0.5] R4[Provide control joints every 4–5 m] R5[Protect from rapid temperature changes shading/insulation] end Cr --> R1 Cr --> R2 Cr --> R3 Cr --> R4 Cr --> R5 style Causes fill:#f4f1ec,stroke:#e6d7bf style Remedies fill:#eef7f6,stroke:#cfe9e4 style Cr fill:#fdeed6,stroke:#f1c68b
Quick checklist to avoid post-curing cracks:
- Start curing ASAP (within 6 hours) and continue for recommended duration.
- Control on-site water addition and maintain correct w/c ratio.
- Provide control joints at recommended spacing for slabs.
- Protect fresh concrete surface from rapid evaporation and temperature swings (shade, windbreaks, wet burlap or curing compound).
0 Comments
If you have any doubts, suggestions , corrections etc. let me know