🏗️ Construction Quantity Estimation Tool
Quick preliminary estimates from building floor area using industry thumb-rule shortcuts
1. Estimation Formulas (Thumb Rules)
These are rough estimation shortcuts used to predict construction material quantities from a building’s floor area. Values are approximate and must be verified against structural drawings and project specifications.
\[ Q_{steel} = A \times 25 \;\text{kg/m}^2 \]
\[ Q_{concrete} = A \times 0.23 \;\text{m}^3/\text{m}^2 \]
\[ Q_{brick} = \frac{A}{2.8} \;\text{(nos)} \]
\[ Q_{formwork} = A \times 2.3 \;\text{m}^2 \]
\[ Q_{int.plaster} = A \times 3.2 \;\text{m}^2 \]
\[ Q_{ext.plaster} = A \times 0.7 \;\text{m}^2 \]
\[ Q_{masonry\;mortar} = Q_{brick} \times 0.15 \;\text{m}^3 \] (approx. from brick quantity)
\[ Q_{plaster\;mortar} = Q_{plaster} \times 0.025 \;\text{m}^3/\text{m}^2 \]
2. Interactive Estimation Calculator
Enter the total building floor area (sum of all floors) to generate preliminary quantities.
Estimated Quantities
| Material / Item | Formula | Quantity | Unit |
|---|
3. Solved Example
Given
A residential building has a total floor area of \( A = 250\,\text{m}^2 \) (ground + first floor).
Step-by-step Calculation
-
Steel / Rebar
\[ Q_{steel} = 250 \times 25 = 6250\,\text{kg} = 6.25\,\text{tonnes} \] -
Concrete
\[ Q_{concrete} = 250 \times 0.23 = 57.5\,\text{m}^3 \] -
Standard Bricks
\[ Q_{brick} = \frac{250}{2.8} \approx 89.29 \approx 89\,\text{thousand bricks (approx.)} \] (or more precisely 89,286 bricks) -
Formwork
\[ Q_{formwork} = 250 \times 2.3 = 575\,\text{m}^2 \] -
Interior Plaster
\[ Q_{int} = 250 \times 3.2 = 800\,\text{m}^2 \] -
Exterior Plaster
\[ Q_{ext} = 250 \times 0.7 = 175\,\text{m}^2 \] -
Plaster Mortar (total plaster area = 800 + 175 = 975 m²)
\[ Q_{plaster\;mortar} = 975 \times 0.025 = 24.375\,\text{m}^3 \] -
Masonry Mortar (using brick quantity)
\[ Q_{masonry\;mortar} = 89286 \times 0.15 \approx 13393\,\text{m}^3 \quad \text{(this factor is relative; verify locally)} \] Note: The “×0.15” factor in some charts is often applied to brick volume or a derived unit; always cross-check with local practice.
4. Estimation Workflow (Flowchart)
5. How to Use This Tool
- Measure or obtain the total built-up / floor area of the building (sum of all floors) in m².
- Enter the area in the calculator above and click Calculate Quantities.
- Review the generated table — these are preliminary figures only.
- Cross-check with structural drawings, architectural plans, and local specifications before finalizing the Bill of Quantities (BOQ).
- For bricks, formwork, and plaster, more accurate results come from measuring actual wall lengths, heights, openings, and surface areas.
0 Comments
If you have any doubts, suggestions , corrections etc. let me know