Slopes and Landslide Vulnerability Checking and Data Storing

Select Values from Dropdown List

Type of Road:	Expressway National Highway State Highway Major District Road Other District Road Village Road Non Plan Road
Road Number:
Chainage of LandSlide:
Landslide Location:	on NH/SH/MDR Without Settlement on NH/SH/MDR and near settlement On NH/SH/MDR and near railways
Latitude:
Longitude:
Age of Cutting:	Very old more than 10 yrs Old less than 10 yrs Recent
Type of Slope:	Soil Debris Rock
Mode of failure:	Composite Planar Wedge
Type of lithology:	Sandstone Siltstone or shale Sandstone, Siltstone and shale
Thickness of soil/debris on affected slopes:	Thin less than 1m Moderate 1 to 2m Thick more than 2m
Thickness of overburden:	Thin less than 1m Moderate 1 to 2m Thick more than 2m
Vegetation on affected slope:	Vegetated Sparse Non Vegetated
Vegetation above beyond affected slope:	Vegetated Sparse Non Vegetated
Height of cutting:	0 to 10m 10m to 30m More than 30m
Slope of cutting:	Less than 35 Degree 35 to 50 Degree More than 50 degree
Cut slope angle V/S Uphill natural slope:	Gentle Moderate Steep
Water conditions:	Dry Dripping Flowing
Deformation characteristics (cracks/subsidence/failure):	Less deformed Moderately deformed Highly deformed
Joint sets:	1 Set 2 Sets 3 or More
RMR(rock slope):	0 to 25 26 to 50 50 to 100
Direction of bedding plane/foliation:	Inside Oblique Towards Road
Susceptibility Score:
Susceptibility Remarks:

Note: Before sending data to Google Sheet, click on Check Vulnerability to assess susceptibility. After submission, if successful, press the back button and refresh to view collected data via the "Collected Data" link.

Total Sum:

Susceptibility Analysis status:

Select Data from Sheet to View:

Refresh the page if your data is not visible in Collected Data.